Savings
Typicaly 50 % of the chiller power consumption,
which leads to 20 - 30 % of the total power bill (average building power bill consists
50 - 60 % of chiller power)
The SMARDT
advantages
- 100 % oil free: eliminates oil maintenance costs
- magnetic bearings: eliminate frictional losses
- only one moving part: assures long service life
- highest efficiency: reduced operating costs
- very low starting current: < 5 amps
- lowest noise and vibration
- the compressor’s speed adjusts automatically:
excellent part-load efficiencies
- multiple compressors offer build-in redundancy
SMARDT
- a trusted brand
- Designing and Manufacturing oil-free chillers
since 2002
- Large number of Smardt staff are former Turbocor
Inc. employees
- Largest oil‐free R&D facilities anywhere
- Certified Chiller Test Facilities in Australia,
Canada, Germany and China
- Close relationship with Danfoss Turbocor Compressors
Inc.
- Smardt is the largest user of DTC oilfree compressors
(30% of total worldwide production)
- Smardt has over 3000 chillers installed world
wide, with chillers operating in diverse climates.
- Fully AHRI Certified Product Range
Multiple
compressor machine can replace multiple chiller installation
- 1 up to 8 compressors per chiller
- Each compressor can be isolated
- Low turn down
- Benefits:
– Lower chiller cost
– Lower installation cost
– Smaller footprint
– More efficient
– Simpler controls
– 2 temp system
– 2 chillers
TURBOCOR
- a chiller revolution
Turbocor chillers have gained >50% of chiller
market share in the US, Germany and Australia in less than 10 years
No doubt that many more countries will follow
the direction of those major countries recognizing Turbocor as a breakthrough in
chiller technology
The Most
Flexible Chiller Available
- Variable Flow – Temperature Capacity
- Efficient variable capacity: 80% to 90% turndown
- Variable flow – 70% turndown on both the evaporator
& condenser
- Condenser water temperature to 55°F
- Results in the most efficient chiller plant, not
just the most efficient chiller Smardt-Chiller Controller
SMARDT
Chiller Controller
- Color Touch Panel
- Self explanatory display
- Basic compressor data available
- Bus communication available
- Remote monitoring available
- and many other options
System
Approach
- Utilize flexibility and redundancy to improve
performance and reduce the cost of the system
- Use variable system flow and temperature to lower
chiller and chiller plant efficiency
- Select Cooling towers and air handling unit
coils to provide lower lii to the chiller and improved system efficiency
- Models not sophisticated enough generally
- Poor chiller curve models
- Optimum chiller staging points
- Optimum variable flow and condenser water relief
- More complex systems – evap cond, etc.
Heat
Exchanger
- Flooded Evaporator
- High Performance
Copper Tubes
- Corrosion Protection Options
Certified
Performance Simulation
- based on your inputs a performance simulation
will be generated on AHRI certified software
- the SMARDT chiller’s performance is guaranteed
- enables comparison and payback calculation
Customization
- We can build any chiller you need with Turbocor
compressors
- Including 24bar pressure possible
- Up to 5C
FINANCE
OFFER FOR CHILLER REPLACEMENT
- No Capital Expense
- Increase your profitability, through the big
savings our chillers achieve
- No risk for you
- You benefit from the superior quality and efficiency
of the leading chillers
- You will benefit from the entire savings of the Quantum chillers after
our tenure, for 20 years or more!
Maintenance
Advantage
- Over 70% of chiller field costs are due to problems
with compressor oil return (Sources: Emerson Electric, AHRI)
- While with Smardt’s magnetic bearing compressor:
àRemoving oil system removes 70% of field service costs
Minimal
maintenance:
- Annually check electronics for tight connections
- No oil service or oil disposal – EVER!
- Only to replace: soi starter fans yearly, capacitors
every 10 years
SMARDT
chiller range
Water cooled
a) Type WA, TT300, TT350
Ref. Capacity 250
– 2250 kW
70 – 650 ton
cond. temp. <
57°C
compressor max. 6
b) Type WA,
TT400, TT500
Ref. Capacity 400 – 3500 kW
110 – 1000 ton
cond. temp. < 43°C
compressor max. 6
Air cooled
Type AC TT300, TT350
- Ref. Capacity 250
– 1400 kW
- 70 – 400 ton
- cond. temp. <
57°C
- compressor max. 4
Remote Cond.
Type L TT300, TT350
- Ref. Capacity 250
- 1750 kW
- 70 - 500 ton
- cond. temp. <
57°C
- compressor max. 6