background background

Little Tree is a fertile ground for green builders and home owners in Bali who are in need of eco-friendly building materials and home supplies. Green buildings... that's us!

Little Tree Bali - Green Building Centre

by email

by phone

Customer Service
+62 (0) 81139605497

If you have a special request please feel free to contact our staff directly.

in our store

Now open from Monday to Saturday:
9:00 - 18:00

Bona Wave 1K - Wood Floor Finishing

Waterborne 1-component lacquer for surface treatment of wooden floors in domestic areas. Can be combined with a primer or be applied directly to wood.


product-image-1
product-image-2
product-image-3
  • product-thumbnail-1
  • product-thumbnail-2
  • product-thumbnail-3
ENQUIRE ABOUT THIS PRODUCT
  • Great wear, scuff, scratch & chemical resistance
  • Very low odour
  • Low solvent content (VOC), <4%
  • DIBt approved for low indoor emissions
  • Complies to DIN 18032:2 (suitable friction for sports floors)
  • Complies to DIN 18032:2 (suitable friction for sports floors)
Application:
  1. Apply lacquer using a Bona Roller or Bona T-bar applicator. Roll with a smooth flowing motion alternately across and with the grain of the wood avoiding accumulations of product. Always maintain a “wet edge” to avoid overlaps.
  2. Allow to dry before applying another layer of finish. Anticipate slightly longer drying time for each layer that is applied. If necessary make an intermediate sanding using a screen or the Bona Scrad System grit P150 (or finer) and remove dust before applying the final layer of finish. Note: If the previous layer of lacquer has been allowed more than 24 hours drying time then an intermediate sanding is always required.
The floor will allow light foot traffic approximately 8 hours after the final application. Allow the surface to dry for at least 1 week before covering with carpets or other floor coverings, or loading with heavy objects. Also avoid damp mopping the floor during this time. 

Type of finish: Waterborne 1-component polyurethane/acrylate co-polymer 


Sheen (at 60°): Silkmatt 40-45%, Matt 20-25% Dilution: If required, dilute with Bona Retarder (4%) for longer open time. 

Drying time, until: - Ready for sanding/recoating: 2-3 hours* - Light use: 24 hours* - Full hardness: 7 days* *under normal climate conditions, 20°C/60% R.H. 

Application tools: Bona Roller or T-bar applicator Application rate: 8-10 m 2 /litre (120-100g/m 2 ) per coat 

Safety Unclassified 

Cleaning: Wipe tools free from residual material before cleaning with a minimum of water. Dried material can be removed with acetone. 

Shelf life: 1 year from date of production in unopened original container 

Storage/transport: The temperature must not fall below +5°C or exceed +25°C during storage and transport. 

Disposal: Wastes and emptied containers should be handled in accordance with local regulations. 

Pack size 3 x 5 litres (44 boxes per pallet)

SIMILAR PRODUCTS


Don't know where to start?
Check our guide
Need product information?
Talk with our sales team
Why build green?

signup for product updates


privacy policy
Sari Organic - Vegetarian Cafe