- Good build
- Forgiving/easy application
- Easy to abrade
- Non-yellowing
Application:
- Apply the lacquer using a Bona Roller. Roll with a smooth flowing motion alternately across and with the grain of the wood avoiding accumulations of product. Always maintain a “wet edge” to avoid overlaps.
- Allow to dry before applying another layer of finish. Anticipate slightly longer drying time for each layer that is applied. If necessary, make an intermediate sanding using a screen or the Bona Scrad Pad System grit P150 (or finer) and remove dust before applying the final layer of finish. Note: If the previous layer of lacquer has been allowed more than 24 hours drying time then an intermediate sanding is always required.
Light foot traffic can be resumed the following day. Allow the surface to dry for at least 1 week before covering with carpets or other floor coverings or loading with heavy objects. Also avoid damp mopping the floor during this time.